Mendham Fire Department will celebrate its 105th year of volunteer community service in 2010. Once again with your assistance our volunteer firefighters have answered the call. Following an over 100-year tradition, your volunteers regularly interrupt their lives, leaving family, friends, and work to answer those in need of assistance. Your support is a strong signal that you value the service of our volunteers, and the significant tax savings of a volunteer department. We appreciate any donation you can make to help our department.

You can also show your support with a donation of time! As with all Volunteer emergency service organizations it is becoming increasingly difficult to recruit new members. We have a real need for additional volunteers, particularly during the school year when many of our most valued members are away at college. Positions are available for anyone aged sixteen and up comprising varying degrees of training and commitment.

Please click here to donate online, via PayPal*

Very truly yours,

Mendham Fire Department Fund-raising Committee

Donations are tax deductible and the Fire Department is eligible for corporate matching gifts through “Mendham Independent Hook & Ladder Co.”

*A PayPal account is not necessary or required to make an online donation.

Focus on Fire Safety: Candle Fire Safety

With the holidays fast approaching and the increased usage of seasonal decorations, it is important to focus on candle fire safety and prevention.  Because the majority of candle fires result from human error and negligence, candle fires and their associated casualties are preventable.

• If possible, avoid using lighted candles.
• If you must use candles, ensure that they are placed in sturdy holders.
• Keep candles away from children and pets.
• Be sure to extinguish candles after each use.
• Never leave burning candles unattended.

By following a few candle fire safety tips, everyone can enjoy a safe and happy holiday season.

Causes and Circumstances of Home Candle Fires

• On average, one home candle fire is reported every 34 minutes.
• More than half of all candle fires start when something that could burn, such as furniture, mattresses or bedding, curtains, or decorations is too close to the candle.
• In one-fifth (20%) of candle fires, the candles are unattended or abandoned.
• Almost two-fifths of home candle fires begin in the bedroom.
• Falling asleep is a factor in 12% of home candle fires and 26% of the associated deaths.
• December is the peak time of year for home candle fires.  In December, 13% of home candle fires begin with decorations compared to 4% the rest of the year.
• One-half of home candle fire deaths occur between Midnight and 6 am.
• Young children and older adults have the highest death risk from candle fires.
• The risk of fatal candle fires appears higher when candles are used for light.

Candle Safety Tips

• Avoid using lighted candles.
• If you do use candles, ensure they are in sturdy metal, glass or ceramic holders and placed where they cannot be easily knocked down.
• Keep candles out of the reach of children and pets.
• Set a good example by using matches, lighters, and fire carefully.
• Children should never be allowed to play with matches, lighters, or candles.
• Never put candles on a Christmas tree.
• Extinguish candles after use and before going to bed.
• And NEVER leave burning candles unattended!

Remember!  Candle fires are PREVENTABLE!

In the event of a fire, remember time is the biggest enemy and every second counts!

Escape first, and then call for help. Develop a home fire escape plan and practice it frequently with your family.  Designate a meeting place outside. Make sure everyone in the family knows two ways to escape from every room.

Never stand up in a fire, always crawl low under the smoke, and try to keep your mouth covered. Never return to a burning building for any reason: it may cost you your life.

Finally, having a working smoke alarm dramatically increases your chances of surviving a fire.

From the U.S. Fire Administration website, for more information please visit: www.usfa.dhs.gov.

Each year the Mendham Fire Department & First Aid Squad respond to a significant number of fires and medical emergencies caused by electrical malfunction. Every year in the United States, more than 1,000 people are killed and thousands more injured in electrical fire or shock incidents. It is important to know how to use electrical appliances safely and how to recognize electrical hazards.

• The Nature of Electricity
• General Electrical Safety
• Safety With Electrical Appliances
• Electrical Emergencies

The Nature of Electricity

Most homes have two incoming voltages: 120 volts for lighting and appliance circuits and 240 volts for larger air conditioning and electric dryer circuits.

When an appliance switch is turned on, electrical current flows through the wire, completing the electrical “circuit” and causing the appliance to operate. The amount of flowing current is called “amperage.” Most lighting circuits in the home are 15 amp circuits. Most electric dryers and air conditioners require larger 30 amp circuits.

The amount of electrical power needed to make an appliance operate is called “wattage” and is a function of the amount of current flowing through the wire (amperage), and the pressure in the system (voltage).

Mathematically speaking, volts x amps = watts. So, if we have a 120 volt system and a 15 amp current, we can flow a maximum of 120 x 15 or 1,800 watts on a typical lighting or appliance circuit. When too many lights or appliances are attached to the electrical system, it will overload and overheat. This can cause the wire insulation to melt and ignite, resulting in an electrical fire. The amount of electrical current flowing through wire is affected by resistance. This is known as “ohms.” Resistance causes increased heat in the wire. Heat is the byproduct that makes some appliances work, such as an iron, toaster, stove or furnace. Large current faces high resistance when moving through a small wire. This generates lots of heat. That’s how an incandescent light bulb works. Resistance through the light filament causes it to heat up which gives off a bright light. Electrical resistance also is affected by the length of a wire. Operating an electrical hedge clipper with a long extension cord increases resistance and might cause the cord to overheat, melt or ignite. The same occurs if too many strands of Christmas lights are connected together.

The size of electrical wire is dependent upon the amount of current required to operate a particular appliance. Wiring to the air conditioner, electric stove and electric dryer is much larger to handle the increased voltage (240) volts) and amperage (30 amps). Wiring is covered with a protective material called “insulation.”

Electrical circuits in homes are designed so that all components are compatible. The size of the wire, outlets and circuit breakers are designed for an anticipated electrical load. A circuit is said to be overloaded when too much current flows causing heat build up or wiring to break down. When two bare wires touch, a “short circuit” is said to occur. This can lead to sparks and fire. Deteriorated insulation is one of the most frequent causes of short circuits.

A “circuit breaker” or “fuse” is a safety device designed to prevent accidental overloading of electrical circuits. They are set at a specific amperage. When that amperage is exceeded, it trips and shuts off the flow of electricity, stopping the circuit from continued overheating. When a fuse or circuit breaker trips, it is important to find the cause and correct it. Often, people will just reset the breaker or put in larger fuse. NEVER USE OVERSIZED FUSES ON CIRCUIT BREAKERS. NEVER SUBSTITUTE A PENNY OR FOIL-WRAPPED FUSE. This could cause a fire!

General Electrical Safety

When a house is under construction, city inspectors visit to make sure the electrical system is in compliance with the County Building Code and the National Electrical Code. Only licensed electricians are permitted to install electrical systems. During home remodeling, when electrical circuits are added or changed, make sure to use a licensed electrician whose work complies with the electrical code. Add enough outlets in every room to avoid using multiple plugs or extension cords. Use a ground fault interrupter (G.F.I.) on circuits in the bathroom, or outdoors where water or moisture is present. G.F.I. is a type of very sensitive circuit breaker and is required by the Phoenix Construction Code.

When choosing an electrical appliance, be sure it is approved by a safety-testing laboratory. This insures that it has been constructed in accordance with nationally-accepted electrical standards and has been evaluated for safety. Use the appliance only according to manufacturer’s specific instructions.

If you touch an electrical appliance, wall switch or electrical cord while you are wet or standing in water, it will increase the chance of electrical shock.

When using an extension cord, be sure it is designed to carry the intended load. Most cannot carry as much current as permanent wiring and tend to overheat. Do not use an extension cord in place of permanent wiring, especially if a tripping hazard exists or where there is high physical abuse, such as under a carpet. Keep electrical cords away from infants and toddlers and use tamperproof inserts on wall outlets to prevent them from sticking objects into the outlets. The cord must be protected from damage. Do not run it around objects or hang on a nail. Inspect it periodically for worn insulation and overall condition.

Safety with Electrical Appliances

The potential for electrical shock or fire from an electrical appliance is very real, especially when safety recommendations are not followed.

Before buying an appliance, look for the label of a recognized testing laboratory such as Underwriters Laboratory or Factory Mutual.

Keep space heaters, stoves, irons and other heat-producing appliances away from furniture, curtains, bedding or towels. Also, give televisions, stereos and computers plenty of air-space so they won’t overheat.

Never use an appliance with a damaged cord, and be sure to use three-pronged electrical devices in three-pronged outlets. These outlets may not be available in older homes, so use a three-pronged adapter, and screw the tab onto the grounded outlet box cover. Never cut off or bend the grounding pin of the plug. If you have a polarized plug (with one side wider than the other), never file it down or try to make it reversible.

Keep electrical cords out of the path of traffic. If you put cords under carpets or rugs, wires can be damaged and might result in fire.

An electrical cord should never be wrapped around an appliance until the appliance has cooled. Because hair care equipment is often used in bathrooms near sinks and bathtubs, it is extremely important to be especially careful that the appliances do not come in contact with water. If one drops into water, do not touch it until you have pulled the wall plug.

Protect young children by putting plastic inserts in receptacle outlets not in use to keep them from putting anything into outlets.

Never put a kitchen knife or other metal object in a toaster to remove stuck bread or bagels unless it is unplugged and cooled. Install television and radio antennas where they cannot fall across power lines. Use caution when operating a tree-pruning device or using a metal ladder around power lines.

Inspect appliances regularly to make sure they operate properly. If an appliance smells funny when in use, makes unusual sounds or the cord feels warm to touch, repair or replace the unit. Don’t repair it yourself unless you are qualified. Keep appliances in a cool, dry place to prevent rusting.

Electrical Emergencies

When an electrical emergency occurs, there are several survival actions that can be taken. You should know how to trip the main circuit breaker at the electrical panel to turn off all power to the house.

If an appliance smells funny or operates improperly, pull the plug if it can be done safely. If arcing, burning or smoking from an appliance occurs, turn off the power at the circuit breaker and CALL THE FIRE DEPARTMENT.

Winds accompanying thunderstorms may knock down power lines or utility poles. Keep people away from the area, and call the fire department. If power lines come in contact with a vehicle, do not touch it or the vehicle. If people are inside, tell them to stay inside. If they try to exit, they may complete a grounded electrical circuit and be instantly killed. They must stay inside until the power is shut by the utility company.

If a serious electrical malfunction occurs in your home, school or workplace, it is the same as a fire. Notify others, activate the fire alarm and exit promptly. If you are familiar with the operation of a fire extinguisher, you can use only a “Class C” Fire Extinguisher on an electrical fire.

Dear Valued Citizen:

Please take a few moments to complete the self-inspection checklist listed on this page. While some items might not apply to your household, any items you answer "NO" could represent a potential hazard in your home that should be corrected. If you answer "YES" to all of the items, we congratulate you on your personal fire prevention efforts! Thank you for your time and for your interest in fire safety.

Craig Bellamy
Fire Official

Did You Know………

• most fire fatalities and injuries in the U.S. occur in the victim’s own home?
• two-thirds of all home-fire victims die of smoke inhalation, poisonous gases, or lack of oxygen; not severe burns?
• cooking is the leading cause of all residential fires and fire injuries?
• heating equipment is the second leading cause of residential fires?
• more than 40% of fatal home cooking fires occur while the victims are asleep?
• careless use of smoking materials is the leading cause of residential fires that result in death?

Survival Tips

1. Make sure your family has an escape plan. Contact the Fire Prevention office or your neighborhood fire station for more information on developing a plan.
2. Sleep with the bedroom door closed. Closed doors provide protection against heat and smoke.
3. Teach everyone in your household to recognize the sound of your smoke alarm.
4. Test doors before opening them. You can easily be overcome by heat, smoke or flames when you open a door to an area where a fire has spread.
5. Use windows as alternate exits.
6. Crawl low under smoke. During a fire, super heated air and toxic gases fill the room from the top down. This leaves a "safety zone" of breathable air about 12 to 24 inches above the floor.
7. Call 9-1-1. Unless you are trapped inside, it’s too dangerous to call from a burning home. Once you have escaped and reported to your meeting place, call 9-1-1 on a neighbor’s telephone.
8. If your clothes catch on fire: Stop, Drop, and Roll.

Learn Not To Burn! Fire Smart Equals Fire Safe!!!

Fire destroys more property and claims more lives annually than any natural disaster. It is also the most preventable disaster.

Please help us reduce the senseless loss of property and lives in our community by making a conscious effort to maintain a home free of fire hazards. Share this information with relatives and friends. Remember, fire prevention begins with education.

Should you have any questions regarding fire safety, or want more information on any of these topics, please call our Fire Prevention Division at (973) 543-7152